Description
Andeli SP 16A MCB – Product Overview
The Andeli SP 16A MCB is a single pole miniature circuit breaker designed to protect electrical circuits from overload and short circuit conditions. It is suitable for residential and commercial distribution boards where individual circuit protection is required. The single pole configuration disconnects the live conductor during abnormal current flow, helping protect wiring systems and connected equipment.
This breaker is commonly used for socket outlet circuits, lighting circuits with moderate load, and other branch circuits within standard single-phase systems. It is intended for fixed installations operating within typical 220–240V AC supply environments.
Andeli SP 16A MCB – Single Pole Protection
The Andeli SP 16A MCB features a single pole (SP) design, meaning it isolates one conductor, usually the live line. This makes it suitable for protecting individual circuits in distribution boards where neutral disconnection is managed separately.
Single pole breakers are widely applied in residential and commercial wiring systems. Proper breaker selection should be based on cable size, installation method, and expected load, in accordance with local electrical regulations.
Andeli SP 16A MCB – Thermal-Magnetic Operation
The breaker operates using a thermal-magnetic tripping mechanism. The thermal element responds to sustained overload conditions, helping prevent overheating of cables over time. The magnetic element reacts rapidly during short circuit faults, disconnecting the circuit to reduce potential damage.
This dual mechanism allows the breaker to tolerate normal startup currents from appliances while still providing dependable protection against abnormal electrical faults.
Andeli SP 16A MCB – 16 Amp Current Rating
The 16A rating makes this MCB suitable for moderate-load circuits such as socket outlets, small kitchen appliances, office equipment, and certain lighting circuits depending on the wiring design.
Before installation, it is important to confirm that the 16A rating aligns with the cable capacity and intended load. Correct circuit design and compliance with applicable wiring standards are essential to ensure safe and reliable operation.
Andeli SP 16A MCB – Durable Construction
The breaker is enclosed in a heat-resistant insulating casing designed to contain internal arcs and protect users from accidental contact with live parts. The toggle switch clearly indicates ON and OFF positions, allowing straightforward manual control.
In the event of a trip, the handle position shows that the breaker has disconnected due to a fault. Its compact modular design enables easy installation on standard DIN rails within most distribution boards.
Andeli SP 16A MCB – Suitable Applications
This MCB is appropriate for various fixed wiring applications, including:
Socket outlet circuits
Small appliance circuits
Moderate-load lighting circuits
Residential distribution boards
Office and retail installations
Light commercial electrical systems
It is designed for indoor installation within an approved enclosure. The breaker should not be exposed directly to moisture or harsh environmental conditions without appropriate protection.
Andeli SP 16A MCB – Installation Guidelines
For safe and reliable performance:
Install on a compatible DIN rail inside a proper distribution board
Ensure cable size supports the 16A rating
Tighten terminals securely to avoid loose connections
Do not exceed recommended current limits
Follow applicable local electrical regulations
Have installation carried out by a qualified electrician
Correct installation and periodic inspection contribute to long-term system safety and performance.
Andeli SP 16A MCB – Key Features
16A current rating
Single pole (SP) configuration
Thermal-magnetic tripping mechanism
DIN rail mounting design
Clear ON/OFF indication
Compact modular construction
Suitable for residential and commercial use
Designed for fixed electrical installations
Andeli SP 16A MCB – Practical Circuit Protection Solution
The Andeli SP 16A MCB provides dependable protection for moderate-load branch circuits in standard low-voltage electrical systems. Its single pole design and thermal-magnetic operation make it suitable for everyday residential and commercial applications when properly selected.
When installed in accordance with electrical standards and matched with appropriate cable sizing, this breaker supports safe operation by protecting wiring systems and connected equipment from overload and short circuit faults.
