Description
Andeli SP 10A MCB – Product Overview
The Andeli SP 10A MCB is a single pole miniature circuit breaker designed to protect electrical circuits from overload and short circuit conditions. It is suitable for residential and commercial distribution boards where individual circuit protection is required. The single pole configuration is intended to disconnect the live conductor during abnormal current flow, helping protect wiring systems and connected devices.
This breaker is commonly used for lighting circuits and other low-current applications within standard single-phase electrical systems. It is designed for fixed installations operating within typical 220–240V AC supply environments.
Andeli SP 10A MCB – Single Pole Protection
The Andeli SP 10A MCB features a single pole (SP) design, meaning it controls and isolates one conductor, usually the live line. This makes it suitable for protecting individual branch circuits in a distribution board.
Single pole breakers are widely used in lighting and low-load circuits where neutral disconnection is managed separately. Proper selection should always be based on cable size, installation method, and expected load requirements in accordance with local electrical regulations.
Andeli SP 10A MCB – Thermal-Magnetic Operation
The breaker operates using a thermal-magnetic tripping mechanism. The thermal element responds to sustained overload conditions, helping prevent gradual overheating of cables. The magnetic element reacts quickly during short circuit faults, disconnecting the circuit to limit potential damage.
This dual protection system allows the breaker to handle normal operational variations while still providing reliable response during fault conditions.
Andeli SP 10A MCB – 10 Amp Current Rating
The 10A rating makes this MCB suitable for lighting circuits and other low-current wiring applications. It is commonly installed in residential homes, offices, and shops where circuits require controlled and moderate current flow.
Before installation, it is important to confirm that the 10A rating matches the cable capacity and intended load. Circuit protection devices should always be selected based on proper electrical design and compliance with applicable wiring standards.
Andeli SP 10A MCB – Durable Construction
The breaker is enclosed in a heat-resistant insulating casing designed to contain internal arcing and provide protection against accidental contact with live components. The toggle switch clearly shows the ON and OFF positions, allowing easy manual operation.
In the event of a trip, the handle position indicates that the breaker has disconnected due to a fault. The compact modular structure allows simple installation on standard DIN rails inside most distribution boards.
Andeli SP 10A MCB – Suitable Applications
This MCB is appropriate for a range of fixed wiring applications, including:
Lighting circuits
Control circuits
Low-load branch circuits
Residential distribution boards
Office and shop installations
Small commercial electrical systems
It is intended for indoor installation within an appropriate enclosure. Direct exposure to moisture or harsh environmental conditions should be avoided unless additional protection is provided.
Andeli SP 10A MCB – Installation Guidelines
For safe and reliable operation:
Install on a compatible DIN rail inside an approved distribution board
Ensure cable size is suitable for the 10A rating
Tighten terminals securely to prevent loose connections
Do not exceed recommended current limits
Follow applicable local wiring regulations
Have installation carried out by a qualified electrician
Proper installation and routine inspection support long-term safety and performance.
Andeli SP 10A MCB – Key Features
10A current rating
Single pole (SP) configuration
Thermal-magnetic tripping mechanism
DIN rail mounting design
Clear ON/OFF indication
Compact modular construction
Suitable for lighting and low-load circuits
Designed for fixed electrical installations
Andeli SP 10A MCB – Practical Circuit Protection Solution
The Andeli SP 10A MCB provides dependable protection for lighting and low-current circuits within standard low-voltage electrical systems. Its single pole design and thermal-magnetic operation make it suitable for everyday residential and commercial wiring applications.
When correctly selected and installed according to electrical standards, this breaker helps protect wiring and connected equipment from overload and short circuit faults while supporting safe and organized distribution board setups.
