Description
Andeli DP 63A MCB – Product Overview
The Andeli DP 63A MCB is a double pole miniature circuit breaker designed to protect electrical circuits from overload and short circuit conditions. It is suitable for use in residential, commercial, and light industrial distribution systems where dependable circuit protection and safe isolation are required. The double pole configuration ensures that both live and neutral conductors are disconnected simultaneously during a fault.
This breaker is commonly installed in distribution boards as a main switch for smaller single-phase systems or as a protective device for higher-load circuits. It is intended for fixed electrical installations operating within standard low-voltage supply systems.
Andeli DP 63A MCB – Double Pole Protection
The Andeli DP 63A MCB features a double pole (DP) design, meaning it controls and isolates two conductors at the same time. This enhances safety by ensuring complete circuit disconnection when the breaker trips or is switched off manually.
Double pole breakers are often used where full isolation of the circuit is required, such as main incoming supply lines, sub-distribution boards, and dedicated equipment circuits. Proper selection of the breaker rating should always be based on the circuit load and cable size.
Andeli DP 63A MCB – Thermal-Magnetic Operation
The breaker operates using a thermal-magnetic tripping mechanism. The thermal element responds to sustained overload conditions, helping prevent overheating of cables and connected equipment. The magnetic mechanism reacts quickly to short circuit faults, disconnecting the circuit almost instantly to reduce potential damage.
This dual-response system allows the breaker to tolerate normal temporary surges while still providing reliable protection against abnormal current flow.
Andeli DP 63A MCB – 63 Amp Current Rating
The 63A rating makes this MCB suitable for circuits that carry moderate to high loads, depending on the installation design. It is commonly used as a main switch in small residential distribution boards or for protecting sub-circuits supplying equipment such as water heaters, small workshops, or commercial installations.
Before installation, it is important to confirm that the 63A rating matches the intended load and cable capacity. Electrical protection devices should always be selected according to local wiring standards and proper load calculations.
Andeli DP 63A MCB – Durable Construction
The breaker is housed in a heat-resistant insulating casing designed to contain internal arcs and provide user protection. The toggle switch clearly indicates ON and OFF positions, and in the event of a trip, the handle moves to show that the breaker has disconnected due to a fault.
The compact modular design allows for easy mounting on standard DIN rails inside most distribution boards. Clear terminal markings assist with correct wiring and reduce the risk of connection errors during installation.
Andeli DP 63A MCB – Suitable Applications
This MCB is appropriate for a range of applications, including:
Main switch protection in small distribution boards
Sub-distribution panels
Residential electrical systems
Commercial wiring installations
Dedicated equipment circuits
Workshop and light industrial environments
It is designed for indoor installation within a suitable electrical enclosure. The breaker should not be exposed directly to moisture or harsh environmental conditions without proper protection.
Andeli DP 63A MCB – Installation Guidelines
For safe and reliable performance:
Install on a compatible DIN rail inside an approved distribution board
Ensure cable size matches the 63A rating
Tighten terminals securely to avoid overheating
Do not exceed recommended current limits
Follow applicable local electrical regulations
Have installation performed by a qualified electrician
Correct installation and periodic inspection support long-term performance and safety.
Andeli DP 63A MCB – Key Features
63A current rating
Double pole (DP) configuration
Thermal-magnetic tripping mechanism
DIN rail mounting design
Clear ON/OFF indication
Suitable for residential and commercial use
Compact and practical construction
Designed for fixed electrical installations
Andeli DP 63A MCB – Practical Circuit Protection Solution
The Andeli DP 63A MCB provides dependable protection for electrical circuits where safe isolation and overload protection are required. Its double pole design, combined with thermal-magnetic operation, makes it suitable for use in standard low-voltage distribution systems.
When properly selected and installed according to electrical standards, this breaker offers stable and consistent performance, helping protect wiring systems and connected equipment from electrical faults.
Short Description
