Tronic AVS 30A

Tronic AVS 30A: Complete Voltage Protection for Your Appliances

Voltage fluctuations are a common cause of appliance failure. Low power (under-voltage) can seriously damage refrigeration appliance compressors and plasma TV power supplies, while high power (over-voltage) can destroy sensitive electronic components in televisions, computers, and other equipment . The Tronic AVS 30A addresses both threats by continuously monitoring the incoming mains supply with state-of-the-art microprocessor technology . When voltage rises above or drops below preset acceptable limits, the unit instantly disconnects power, protecting your valuable appliances from harm . Once the voltage returns to safe levels, the device waits for a pre-set start-up delay before reconnecting, preventing damage from rapid power cycling and the massive surges often experienced when power returns after blackouts .

Tronic AVS 30A: Key Specifications

Tronic AVS 30A: Comprehensive Protection Features

The Tronic AVS 30A incorporates multiple layers of protection to ensure your equipment remains safe under various fault conditions :

• Over-Voltage Protection: When voltage exceeds the set threshold (adjustable up to 300V), the unit disconnects power to prevent damage to sensitive electronics .

• Under-Voltage Protection: Low voltage can cause motors to draw excessive current, leading to overheating and burnout. The AVS 30A disconnects when voltage drops below safe levels .

• Spike and Surge Protection: Absorbs transient voltage spikes and surges, protecting your equipment from instantaneous damage .

• Power-Back Surge Protection: When power is restored after an outage, a massive surge can occur. The AVS 30A’s restart delay ensures your equipment is not subjected to this surge .

• Basic Lightning Protection: Provides a degree of protection against voltage surges induced by lightning strikes .

• Loss of Neutral Protection: Can protect against serious voltage faults including loss of neutral, which can cause extreme voltage spikes .

Tronic AVS 30A: Advanced Microprocessor Technology

Thanks to its state-of-the-art microprocessor control, the Tronic AVS 30A offers precision monitoring and user-friendly adjustability . All critical parameters—including over-voltage cutoff, under-voltage cutoff, and start-up delay—are fully adjustable . This allows you to fine-tune the protection thresholds based on your specific equipment requirements and local power supply conditions . The wait time can be adjusted from as little as 10 seconds up to 10 minutes, giving you complete control over how quickly your equipment reconnects after a power interruption .

Tronic AVS 30A: Why a Restart Delay Matters

The restart delay is a critical feature of the AVS 30A. When power is restored after a cut or fluctuation, the unit does not reconnect immediately. Instead, it waits for the user-adjustable delay period . This serves two important purposes:

Compressor Protection: Refrigerators, freezers, and air conditioners have compressors that require time for refrigerant pressures to equalize before restarting. Rapid cycling can cause mechanical damage and premature failure. The delay ensures the compressor only restarts under safe conditions .

Surge Avoidance: When power returns after an outage, a momentary surge often occurs. By delaying reconnection, the AVS 30A allows this surge to pass before re-energizing your equipment, protecting against power-back surges .

Tronic AVS 30A: Applications

This 30A voltage protector is suitable for protecting a wide range of high-value equipment :

• Air Conditioners: Protects compressor motors from damage caused by low voltage and voltage fluctuations .

• Large Refrigerators and Freezers: Safeguards food storage by preventing compressor burnout .

• Whole Offices: Can be installed to protect multiple devices in a small office or commercial setting .

• Complete Circuits: Ideal for protecting entire electrical circuits in residential or light commercial installations .

• Direct-Wired Equipment: Perfect for equipment that is permanently wired rather than plugged in .

• Sensitive Electronics: Protects computers, servers, DJ equipment, TVs, HIFIs, sub-woofers, home theatre systems, CCTV camera systems, and pumps .

Tronic AVS 30A: Installation Considerations

Installation should be carried out by a qualified electrician in accordance with local wiring regulations :

• The unit is designed for single-phase 220-240V systems with a 30A current rating .

• Connection is via direct wiring to the mains power, requiring Live, Neutral, and Earth connections .

• Ensure the AVS 30A is installed upstream of the equipment it is protecting, typically between the main supply and the appliance or sub-circuit .

• The adjustable voltage settings allow the installer to fine-tune the protection thresholds based on the specific equipment and local supply conditions .

• For best results, position the unit in a well-ventilated area to ensure proper heat dissipation.

Tronic AVS 30A: Warranty and Exchange Policy

The Tronic AVS 30A is backed by a comprehensive 1-year warranty, reflecting the manufacturer’s commitment to quality and customer satisfaction . If you’re not completely happy with the product, you are entitled to exchange it for another .

The following terms apply for any exchange application:

• The application must be submitted within 5 days of delivery.

• The product must be unused, undamaged, and in its original packaging.

• All accessories or parts must be included.

• The product must be returned within 3 days of the application’s approval.

• All logistic-related costs may re-apply.

The following information will be required on an exchange application:

1. Date of purchase

2. Invoice Number

3. Reason for exchange

4. Alternate product you wish to exchange for

Tronic AVS 30A: Important Notes

• The AVS 30A disconnects power during over-voltage and under-voltage conditions and reconnects automatically after the set delay .

• The wait time is user adjustable from 10 seconds to 10 minutes, allowing customization for different equipment types .

• Suitable for indoor use only; protect from moisture and direct water exposure .

• All wiring must comply with current wiring regulations (BS 7671 in the UK, or local equivalent).

• If the unit shows signs of damage, replace immediately.

• Clean with a soft, damp cloth only. Do not use abrasive cleaners.

Tronic AVS 30A: Quality Assurance

The Tronic AVS 30A is manufactured to meet rigorous quality and safety standards, with advanced electronic components that provide high sensitivity and reliable operation even in harsh environmental conditions . With its comprehensive protection features, microprocessor-controlled precision, and robust construction, the Tronic AVS 30A delivers peace of mind for homeowners and businesses seeking to protect valuable electrical equipment from unstable power supplies .